FREE ⁺ 1400

Flexible heating that gives you freedom – FREE+ 1400 covers up to 9 square meters. FREE+ 1400 has been developed with our ZeroGlare® technology that emits less than 1 LUX/KW red residual light.

More about FREE+ 1400
FREE+ 1400 is designed so that you can take it out when you need heat and pack it up just as quickly when you no longer need it. At the same time, it stands firmly in almost any place and is therefore perfect for those of you who have several outdoor spaces that you switch between.

You avoid red residual light because the infrared heater uses ZeroGlare® technology. The tip-over protection means you never have to worry about the infrared heater tipping over. If this happens by mistake, the infrared heater switches off automatically. In addition, you get an energy efficiency of 1:1, which means that the energy and power supplied to the infrared heater is emitted as heat - no waste and more heat for you.

FREE+ 1400 is the infrared heater that provides maximum freedom

Why choose FREE+ 1400?
Do you want to be warmed up without being confined to a specific location? Solamagic's FREE+ 1400 gives you both freedom and flexibility because you can always take the heat with you. The design means that the FREE+ 1400 stands firmly on basically any surface – on the grass in the garden, the terrace, the concrete floor, the boat – yes, anywhere. It doesn't need to be placed on a stand first – it only needs power, then you get the heat within a second, no matter where you are.

FREE+ 1400 is our only infrared heater that combines unparalleled freedom with high heat output without residual light. It is developed with the same technology as our AIR+ series, which is the only technology on the market that reduces residual light so significantly.

Specifications

Power: 1400 watts
Capacity: Up to 9 m2
Technology: Solamagic newly developed High Performance FREE® technology
Heating element: Solamagic High Performance FREE® heating element:
Reflector: Solamagic High Performance silver-plated, symmetrical reflector
Glare: <20 lux/kW/m2
Connection: 230 V/50 Hz
Connection cable: 1800 mm with earthed plug (Schuko plug)
Rollover protection: The heat lamp switches off automatically at a tilt of +/- 15°
Safety class: SK I
IP rating: IP X4/X5
Material: Weather-resistant aluminum and stainless steel
Surface treatment: Powder coating with anti-corrosion primer, standard: EN-ISO 6270-0
Approvals: Quality controlled/approved by TÜV
Weight: 7.8 kg
Installation: Flat surface
Amp consumption: 6.1 amp v/230 v. Min. fuse 10 amp
Dimensions: (LxWxH) 1000mm x 200mm x 94mm
Base Ø: 350mm